Overview

Boost your roadside emergency supplies with our 15000mAh Car Booster Jump Starter Emergency Mobile Power Bank. Trek Outfit dependable power bank guarantees that you won't be left stranded with a dead car battery thanks to its sturdy Dachang A high power cell. Convenience is the reason behind its small size of 5.1x2.9x0.98inches, and the digital display informs you of the power levels. Your devices can be quickly charged thanks to the dual USB ports 5V/2A input and output. An integrated circuit board with software and hardware protection, an over current and short circuit protection feature, and a safety hammer are all features that prioritize safety. In an emergency, visibility is improved with LED illumination with SOS and flash features. Operating efficiently between -40°F and 149°F, the jump starter generates a 300A starting current and a 600A peak current.

Specifications

• Cell Type: Dachang A High Power Cell (4S)
• Battery Capacity: 15000
• Input: 5V/2A, 15V/1A
• Output: 5V/2A
• Starting Current: 300A
• Peak Currents: 400A, 600A
• Operating Temperature Range: -40°F to 149°F (-40℃ to 65℃)
• Size: 5.1x2.9x0.98inches (131x75x25mm)
• Safety Features: Digital display, safety hammer, LED lighting with SOS and flash, short circuit and over-current protection
• Warranty: 12 months.

How to Use

How to Use the unit to Start a Car:
For testing the emergency battery on a car with a working battery:

1. Verify the engine displacement to ensure compatibility with jump starter.
2. Loosen the screws on one pole of your car's battery.
3. Connect the red clamp to the battery's positive terminal and the black clamp to the negative terminal. Ensure good contact.
4. Insert the jumper cable into the designated port on the jump starter.
5. Press the power button on the jump starter, then start your car as usual.

If your car's battery is dead and the car won't start:

1. Verify the engine displacement to ensure compatibility with jump starter.
2. Loosen the screws on one pole of your car's battery.
3. Connect the red clamp to the battery's positive terminal and the black clamp to the negative terminal. Ensure good contact.
4. Insert the jumper cable into the designated port on the jump starter.
5. Press the power button on the jump starter, then start your car as usual.
6. Quickly disconnect the clamps within 30 seconds after starting the vehicle.

Important: Failing to loosen the battery screws when testing a functional battery can lead to damage!

How to Use the unit for Charging 5V Devices (Smartphones, Tablets, PSP, MP3):

1. Check that at least one power indicator on the power bank is lit.
2. Select the appropriate connector for your device and connect it.
3. Attach the power bank for rapid charging at 5V/2A.
4. Press the round power button to begin charging.

How to Use the High-Quality LED Light Torch Function:

1. Ensure that at least one power indicator on the power bank is active.
2. Long-press the power button for about 3 seconds to turn on the LED light.
3. Press the power button to cycle through the modes: SOS, Fast Flashing, or Steady Light.